Fabrication and characaterisation of tapered and arc-shaped fiber for saturable absorber device in pulse fiber laser operation

Authors

  • Rizal Ramli
  • Mohd Saiful Dzulkefly Zan

DOI:

https://doi.org/10.53655/joe.t2120v

Keywords:

Tapered Fiber, Arc-shaped fiber, Mode-locked, Q-switched, Fabrication and Characterisation

Abstract

Pulse fiber lasers are recent developments that produce efficient pulse lasers by incorporating gain medium, saturable absorber (SA) materials and SA hosts. However, the SA hosts can be improved for stable generation pulse fiber laser. This discussion emphasizes the fabrication and characterisation of tapered and arc-shaped fiber using the flame-brushing and wheel polishing technique, respectively. Examples of using tapered fiber and arc- shaped fiber to generate Q-switched and mode-locked will be deliberated that can possibly be applied in communications, medicine and sensing.

References

P. C. Debnath and D.-I. Yeom, “Ultrafast fiber lasers with low-dimensional saturable absorbers: Status and prospects,” Sensors, vol. 21, no. 11, p. 3676, May 25, 2021, ISSN: 1424-8220. DOI: 10.3390/s21113676

H. Ahmad et al., “The performance of Ti2C MXene and Ti2AlC MAX Phase as saturable absorbers for passively mode-locked fiber laser,” Optical Fiber Technology, vol. 67, p. 102 683, Dec. 2021, ISSN: 1068-5200. DOI: 10.1016/j.yofte.2021.102683

H. Lim, A. T. Jafry, and J. Lee, “Fabrication, flow control, and applications of microfluidic paper-based analytical devices,” Molecules, vol. 24, no. 16, p. 2869, Aug. 2012, ISSN: 1420-3049. DOI: 10.3390/molecules24162869

M. Abu Bakar, R. Ramli, and M. Mahdi, “Fabrication of arc-shaped fiber for saturable absorber device in pulse fiber laser operation,” 2025.

H. Ahmad, R. Ramli, M. Z. Samion, and N. Yusoff, “Mode-locked thulium/holmium co-doped fiber laser using WTe2-covered tapered fiber,” Optik, vol. 245, p. 167 723, Nov. 2021, ISSN: 0030-4026. DOI:10.1016/j.ijleo.2021.167723

Downloads

Published

05-11-2025

How to Cite

Ramli, R., & Zan, M. S. D. . (2025). Fabrication and characaterisation of tapered and arc-shaped fiber for saturable absorber device in pulse fiber laser operation. Jurnal OptoElektronik, 1–4. https://doi.org/10.53655/joe.t2120v

Issue

Volume 4 (2025)

Section

TMP2025: Invited

License

Copyright (c) 2025 Rizal Ramli, Mohd Saiful Dzulkefly Zan

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

By submitting documents to Jurnal OptoElektronik, the authors agree to the followings:
1. Articles are published under a Creative Commons CC BY-NC 4.0 license that allows third parties to read, download, copy and share their work provided proper acknowledgement are given.
2. The authors retain copyright and grant Jurnal OptoElektronik rights of first publication.
3. The authors are permitted and encouraged to share their work online (e.g., in institutional repositories or on their website)
4. The authors verifies that the submission has not been previously published, nor is it before another journal for consideration. If submitting an article for resubmission, the submitting author will need to notify the editor through the Comments for the Editor section in the submission process.
5. The authors are responsible to secure all necessary copyright permissions for the use of 3rd-party materials in their manuscript.
6. The author declares that this is their original work and has been written by the stated authors.